HowTo : Enable/Disable Interface on CISCO - Shutdown Command

Simple examples of brining up and down the interfaces on CISCO devices with shutdown and no shutdown commands.

HowTo : Check Fan Tray status on Cisco

Execute one of the following commands to check the status of fans on Cisco equipment.

HowTo : Configure CISCO port description

Type the following commands to create/edit the description of the port 'FastEthernet 0/1' on CISCO switch or router :
# enable
# configure terminal
(config)# interface FastEthernet 0/1
(config-subif)# description This is 1st Port of My Switch
(config-subif)# end
# write